| Tolerance Of Dimension | +- 2% |
|---|---|
| Wind Resistance | 3-500km/h |
| Material | 25-90ft galvanized Utility pole steel electric pole |
| Height | 65FT 70FT 75FT 80FT |
| Welding | Welding confirms with international welding standard of CWB |
| Height | 8M |
|---|---|
| Pole Shape | 16 sides |
| Minimum yield strength | 345 mpa |
| Load | 5KN |
| Appearance | Tubular,triangular,angular,lattice |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Surface treatment | hot dip galvanization |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Surface treatment | hot dip galvanization |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Surface treatment | hot dip galvanization |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Wind speed | 160km/h, 30m/s |
| Power | 10kv~550kv |
| Torlance of dimenstion | +- 2% |
| Suit for | electricity distribution |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Surface treatment | hot dip galvanization |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Wind speed | 160km/h, 30m/s |
| Power | 10kv~550kv |
| Torlance of dimenstion | +- 2% |
| Suit for | electricity distribution |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Wind speed | 160km/h, 30m/s |
| Power | 10kv~550kv |
| Torlance of dimenstion | +- 2% |
| Suit for | electricity distribution |
| Hình dạng | hình nón, đa hình chóp, hình cột, đa giác hoặc hình nón |
|---|---|
| Kiểu | cực thẳng, cực kéo, cực quay |
| Quyền lực | 10kv ~ 550kv |
| Dung sai của dimenstion | + -2% |
| Xử lý bề mặt | mạ kẽm nhúng nóng |
